Losi Ten-T Conversion

[Moller123456 !]

Originally Posted by XXXDAD

Did the incerts come out or did you loose the screws?

well was held by 1 screw... the gold things the screws go into stayed with the screws.. so bad making once again + the motor mount is bent.

How much pain do i have to go throu before mike shippes me a new conversion kit? It must be clear to the blind eye that my kit has not been made as well as all the other ones? or do all you other people drive slower than nitro cars?

[FG101C]

Remind me to never sell anything to you.

[bryan]

Originally Posted by Moller123456 !

well was held by 1 screw... the gold things the screws go into stayed with the screws.. so bad making once again + the motor mount is bent.

How much pain do i have to go throu before mike shippes me a new conversion kit? It must be clear to the blind eye that my kit has not been made as well as all the other ones? or do all you other people drive slower than nitro cars?

How many little stones travel through your spur/pinion durring your rock road bash sessions? Speaking of blind eyes i'm suprised you dont have two from your doughnuts
Get over it, Mike owes you nothing

[XXXDAD]

Originally Posted by Moller123456 !

well was held by 1 screw... the gold things the screws go into stayed with the screws.. so bad making once again + the motor mount is bent.

How much pain do i have to go throu before mike shippes me a new conversion kit? It must be clear to the blind eye that my kit has not been made as well as all the other ones? or do all you other people drive slower than nitro cars?

I would take pics of anything you think is bad , bent or brokin. Then I would nicly explain what I was doing at the time of the problem that ocured...
Foward all the info to RC Monster..... then go from there!

[FG101C]

I've worked on the rear bumper. I am using a Slash 4x4 bumper, borrowed some ideas I saw on other forums. It's pretty easy really and I don't think it looks to rigged. Although my dremeling of plastic skills suck.

I plan on using the wing mount as the body mount/rear bumper tie in. Looks ok so far.

I ordered a RPM front bumper for the Slash 4x4, I also emailed T Bone Racing about making a front bumper like their Hyper 10 SC, http://cgi.ebay.com/ws/eBayISAPI.dll...m=120572260481 but with the Ten-T bolt pattern, waiting to see what they say.

[Topsy Kretts]

There are some great idea's here,keep us informed on what you end up with on those bumpersI haven't read all the posts, but I noticed a lot of people using different wheel adapters so they can install SC wheels and tire's.I'm not sure if this has been addressed,but I pulled the wheels and tires off my Traxxas Slayer which are 14mm hexes and they were a perfect fit

[FG101C]

Whats the offset on those Slayer wheels. From what I've read to get the wheels to fit under the body we need to use the Pro-Line ProTrac 0mm offset wheels, it requires Slash 4x4 hexes (12mm) and some dremmeling/drilling. If the Slayer wheels are by chance 0mm offset that would be great.

[Topsy Kretts]

Your right! way to wide for even my widest body,the JC Manta 0 offset is definitly the way to fly I just set the stock body on the truck with those wheels and tires,never really checked SC bodies for widthWith these wheels on the truck,it's as wide as it is long