Brushless hpi baja rc-monster

[thomatrix]

Maybe - but I'm not laughing. Will have to modify stuff to make it work. Will make it happen though...

[nuz69]

At thoses motor price levels, you have maybe to contact offshoreelectrics and neumotors support to have a proper explanation about this extra sized motor....

Thom, I did grind a small flat spot on the shaft. For dust protection I'll wire tie one of these Outerwear filters to the rear of the motor. http://www.outerwears.com/proddetail...9290&cat=12439

The Outerwears mesh lets air flow but really keeps the junk out. I've used them on a lot of motors and they work well.
Sorry to hear about the 2230 size problem. I've sent Steve Neu a few e-mails asking him to update the 22XX sizes on his page, but nothing yet.

[kazuaki]

Electric Eel,
What size motor are you running?

[thomatrix]

Originally Posted by kazuaki

electric eel,
what size motor are you running?

2220 :)

[thomatrix]

Originally Posted by Electric Eel

Thom, I did grind a small flat spot on the shaft. For dust protection I'll wire tie one of these Outerwear filters to the rear of the motor. http://www.outerwears.com/proddetail...9290&cat=12439

The Outerwears mesh lets air flow but really keeps the junk out. I've used them on a lot of motors and they work well.
Sorry to hear about the 2230 size problem. I've sent Steve Neu a few e-mails asking him to update the 22XX sizes on his page, but nothing yet.

Did you do it with a Dremel? I am worried about getting it even. If you could post a close up pic of it that would be great!

As for the Outerwears that is a great idea. I did have a look at their Electric motor prefilters but they are far too small for the larger Neu and Lehner motors.

Let me know if you get an answer from Steven Neu on the size btw. Does your 2220 length match those from the chart?

[thomatrix]

Here is the motors I'll be testing. Still waiting for batteries so no telling how long I have to wait until I get to try them out.

[kazuaki]

Originally Posted by thomatrix

Here is the motors I'll be testing. Still waiting for batteries so no telling how long I have to wait until I get to try them out.

Have you figured out a way to fit the 2230?

[thomatrix]

Originally Posted by kazuaki

Have you figured out a way to fit the 2230?

Only way I can see is to dremel away some of the area highlighted in the attached picture. If anyone has another approach please let me know!

[thomatrix]

Originally Posted by nuz69

At thoses motor price levels, you have maybe to contact offshoreelectrics and neumotors support to have a proper explanation about this extra sized motor....

I may give them a call and ask. It is a problem that sizes are not accurate.