Monster GT Conversion With A Center Diff

[RC-Monster Mike]

Maybe its your lucky day, Krawlin. I happened to see this thread and checked my pile of dogbones(I always make several if I make any) - I happen to have a steel, black oxide coated bone here that is about 114mm pin to pin length - seems perfect according to your posted dimensions. If you want it, you can order 15 of the RC-Monster custom/misc. parts through the store and it will ship Monday. :)

[nitrostarter]

^^ LUCKY!!

Good find Mike!

[Krawlin]

Originally Posted by RC-Monster Mike

Maybe its your lucky day, Krawlin. I happened to see this thread and checked my pile of dogbones(I always make several if I make any) - I happen to have a steel, black oxide coated bone here that is about 114mm pin to pin length - seems perfect according to your posted dimensions. If you want it, you can order 15 of the RC-Monster custom/misc. parts through the store and it will ship Monday. :)

Just ordered 15 of the RCM custom/misc. parts and I put "114mm dogbone driveshaft for Krawlin from the RCM Forums" in the box where you say what the part is. Thank you so much Mike! You've saved me alot of time and money with this! I don't know of any other online RC parts stores that have an owner that would do this, seriously, thank you!

[The Dude]

Originally Posted by RC-Monster Mike

Maybe its your lucky day, Krawlin. I happened to see this thread and checked my pile of dogbones(I always make several if I make any) - I happen to have a steel, black oxide coated bone here that is about 114mm pin to pin length - seems perfect according to your posted dimensions. If you want it, you can order 15 of the RC-Monster custom/misc. parts through the store and it will ship Monday. :)

that's really nice !!!

[Kcaz25]

Yep more than just lucky. Way to go MonsterMike!

[Krawlin]

Just got that dog-bone drive shaft from RC-Monster Mike, and it's perfect!!! Mocked it all up, fits just right, can't pop out and its long enough where its not riding right on the edge of the drive cup. Thanks again RCM Mike! I don't know of any other online RC store owner that would do that for some random member out of thousands on their forum, that's by far the best customer service I've had for a long long time.

[The Dude]

any update ??

[Krawlin]

Nothing yet, I still have to clearance the chassis for the spur gear and I haven't had time to do that lately. Maybe sometime next week I'll do that and put it all back together.

[The Dude]

here's the little update....

The V2 motor mount....



I'm gonna take it this afternoon

[suicideneil]

Ooooh, now thats a clever bit of design, looks beautiful too.

[medina619]

now if there was only some one that would make these MGT conversions kits for sale.

[suicideneil]

**hint hint**

[The Dude]

Hi

medina619: be patient man, I said there's maybe some kit for sale in few times... but we need to be sure about the kit...

just some pics









but today when I just starting to run my pinion slip away
the reason here....



so I'm waiting for a 11T Robinson pinion...and a spider differential....

tomorrow I'll start the body,

[medina619]

I hear ya. Im just anxiously waiting

[Krawlin]

I haven't even done anything with my MGT for over a month . All I really need to do to it though is solder connectors to my other Turnigy battery since one of them puffed, clearance the chassis for the spur gear, and put it all back together. Been busy with alot of other stuff lately though which is why I haven't really gotten around to it. If I could get access to a CNC mill or even a manual mill, I would machine mine out of a single piece of stainless steel or aluminum rather than welding steel pieces together like I do now just for the cool factor.

TheDude, that motor mount looks awesome, great design, I like it! Have any new videos of it?