Another LST XXL Conversion

Another direct copy

---------------

well i just ordered a 2.5mm thick/thin sheet of CF. This will allow me to go through with my plans.

Here is what i had in mind.

Get rid of the tranny and install a CD using this mount LINK

I will mount the CD on the lower chassi plate which i will make out of CF or 6061-t6 aluminium.

For the batteries i will either mount them on the lower chassis plate by extending it past chassis rails or i will use some savage flux battery trays and mount them to the side of the chassis.

For the upper plate it will have about 2 holes. One for the CD and motor and another for the servo and that is about it.

To give it a lower stance i will try and get hold of some muggy towers as they make the shocks less vertcal and a little more horizontal.

i have already ordered the 17mm hexxes and the wing mount so now i'll try and figure out how i' gonna do this.

God i love school holidays. before i got into RC i would spend most of the hols inside watching tv and doing nothing. now i want to wake up earlier so i can go tto the shed and work on stuff/run my cars/ get out of the house in general. Plus by making all of this stuff myself i am learning how to do things rather than learn them when i'm in uni or something like that.

Anyway that is my little rant of the day.


---------


i might also try and do something like this to my e-maxx/g-maxx and use a CD rather than a tranny to lower the CG.


my inspiration

http://rc-monster.com/forum/showthre...=19881&page=26
http://www.rc-monster.com/forum/showthread.php?t=26070
http://thetoyz.com/forums/index.php?...hl=lst%20muggy

and heaps more