Hot bodies 1/8 diffs

[cmac]

Originally Posted by Overdriven

Make your own, I did. Mine looks like a bigger version of the dynamite one. I used a few pieces of 1/2 inch tubing (electrical conduit), welded it together (could be bolted instead) and a spare LST/aftershock knuckle and axle I had laying around. I had make my own because most MT tires are too tall and wide, truggy size is the limit for the balancers I've seen available.

Yes I think I will have to do that.

[cmac]

Well I just had to take the back half off of the chassis to get the center differential out of the truck( I did not think I was going to have to do that for a while), so I could add another wave spring to it. From one of the other threads it looks like three wave springs is the way to go for heavier trucks. It's now back together, and one half of my tires are glued waiting for them to dry. Does anyone know how long that takes? My carbon fiber turn buckles will have had enough time to cure around 1:00 today, and I will bolt those on, and then all I will have left are the front/rear skids, the front/rear bumpers, the motor, and electronics. Then I can punch the holes into the body. I will post pics soon.