G2 X-brace question. (center skid?)

[coolhandcountry]

You will need the screws to attach the chassis together and to the bulk heads. They are 3 mm screws for the record. I am not sure on length right off.

can't you just use the screws you already have in those places? (unless theres some extra holes or something)

[coolhandcountry]

Originally Posted by JEMCIV

can't you just use the screws you already have in those places? (unless theres some extra holes or something)

If you are refering to the stock ones. There is not enough and they are the wrong length. I can think of about 18 screws right off top of my head you will need. I may be off be a few though.

[Mike.L]

Hey welcome:018: to the fourms i think i have found what you were looking for:
now sure if this will fit the g2-x brace chassis or the stock maxx but here it is
http://www.rc-monster.com/proddetail...LM16010&cat=31
its by fastlane:
and a picture
if this isin't what your looking for then the protective coat/seal thing will be your best choise. cant say i didn't try:027: