New version (V2) MMM has fan control

[DRIFT_BUGGY]

And a different switch. My switch turned itself off the other day after a jump. I thought the day had finally came as nothing was happening only to realise that the switch turned off

[BrianG]

Adding a different switch is easy enough. I like the sealed ones, something like this:



RadioShack link...

[captain harlock]

Could you tell me where to get these bomb activating switches, please? :D

[Patrick]

Originally Posted by captain harlock

Could you tell me where to get these bomb activating switches, please? :D

Follow Brian's link.

[phatmonk]

Originally Posted by DRIFT_BUGGY

And a different switch. My switch turned itself off the other day after a jump. I thought the day had finally came as nothing was happening only to realise that the switch turned off

I have my switch set so its mounted verticaly and the on position is pushed down.It never turns off.

[lincpimp]

Originally Posted by captain harlock

Could you tell me where to get these bomb activating switches, please? :D

This is funny. And no, I will not buy you a plane ticket to come over to the US...

At least yoou have a good sense of humor. Seeing where you reside at the moment, a good bomb joke must be hard to come by...

[DRIFT_BUGGY]

Yeah, maybe if it was the V2 and all faults were fine I would change the switch but doing that will probably void the warranty. Still don't want to take to many chances with the V1 im still running

[Sammus]

To everyone asking why castle aren't releasing specific current draw ratings: read this post.

Originally Posted by DRIFT_BUGGY

Yeah, maybe if it was the V2 and all faults were fine I would change the switch but doing that will probably void the warranty. Still don't want to take to many chances with the V1 im still running

i asked CC about extending the wires on the switch to get it to a more meaningful location. i didn't want to void warranty either. this is what the man wrote:

"As long as you don't solder on the controller itself you're set. You'd
have to splice the wire into the existing wires.

Joe Ford
Product Specialist
Castle Creations"

[George16]

Originally Posted by FunkedOut

i asked CC about extending the wires on the switch to get it to a more meaningful location. i didn't want to void warranty either. this is what the man wrote:

"As long as you don't solder on the controller itself you're set. You'd
have to splice the wire into the existing wires.

Joe Ford
Product Specialist
Castle Creations"

That's exactly what I did to have my switch inside the RX box .



The switch is between the two screws in front of the gray rx box.