 |
|
|
|
|
|
 |
 |
mamba max shuts down after a jump |
 |
|
 |
|
(#1)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 114
Join Date: Jun 2008
|
mamba max shuts down after a jump -
09.25.2008, 08:48 PM
why does my mamba max shut donw after a jump. i've only had it for a day. should i put more servo tape underneath?
|
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
Yip Yip Yip...
Offline
Posts: 1,489
Join Date: Aug 2007
Location: Australia
|
09.25.2008, 08:49 PM
Possibly something to do with the switch. Try mounting the switch differently.
Mini-T Pro: Micro Pro 6800kv, Lipo, HS-81mg, Dirt Hawgs M18MT: Quark 33A, Y22S 6000kv, FP 2s Lipo LRP S8-BX: RC-M Conversion, Tekin RX8 B1600KV, 6S. |
 |
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 114
Join Date: Jun 2008
|
09.25.2008, 08:52 PM
as in how?
nothing is hitting it |
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
Im not dark, Im over ripened! xD
Offline
Posts: 5,607
Join Date: Sep 2007
Location: Westampton NJ
|
09.25.2008, 08:54 PM
or get rid of the swich and tie the wires together. then its on whenever u plug in the batt. less hassle
R/c Monster Team Driver Jq the car, LST, Sportweks turmoil pro Unconventional Techniques, Superior Results |
   |
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 114
Join Date: Jun 2008
|
09.25.2008, 08:59 PM
i have an extra novak switch so i might use that. i plan on using a switch since i easily forget about disconnecting batteries, that's why i don't have lipo.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
RC-Monster Carbon FIBRE NOT FIBER!
Offline
Posts: 701
Join Date: Apr 2008
Location: Brisbane, Australia
|
09.26.2008, 07:41 PM
leaving ANY BATTERY connected will damage it... its just a case of how long. imo they shouldnt have come with switches but thats my opinion of course.
Monster Max Still Working... JR SX3 Neu 1512 2D/S 12t pinion 4800 zippy-r XRAY xt8 MMM Neu 1512 3D/F 11t pinion 6s 5000 Flightmax/ 4s 4000 Turningy |
|
|
|
|
|
|
|
|
|
|
|
|
(#7)
|
|
"1.21 GIGAWATTS!!!"
Offline
Posts: 523
Join Date: Nov 2007
Location: Sacramento
|
09.26.2008, 09:52 PM
are you running a external bec?....this happened to me a couple of times until i found the "cold" solder joint where my bec was plugged in....it also happened when i found another "cold" solder joint on my deans plugs.....
MMP/1410 3800kv 2s 65C 5600mah proteks Dx3s |
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
RC-Monster RC8T
Offline
Posts: 2,554
Join Date: Jan 2008
Location: Syracuse, New York (Camillus)
|
09.26.2008, 10:18 PM
bad solder joint or is there any of the bullets that aren't completely covered with shrink. If any wires touch each other that could be really bad. Best to eliminate the switch, it only shuts down the internal bec
SC10 MMPro 13.5T 2s NeuEnery 5000mah RC18T Mamba 25/5400kv 2s lipo + 6s NiMh |
|
|
|
|
|
|
|
|
|
|
|
|
(#9)
|
|
RC-Monster Stock
Offline
Posts: 42
Join Date: Sep 2007
Location: Logan, Ut
|
09.27.2008, 12:05 PM
I had this problem with mine and went through all my soldering only to find it was the ESC plug into the reciever pulling out. I put a zip tie on it and it fixed the problem.
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Linear Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
