Its finally here!!!!!

[JERRY2KONE]

Go to the store and order your newly released UNIVERSAL CENTER DIFF/MOTOR MOUNT. I have two on order already. Happy birtday to me.

http://www.rc-monster.com/proddetail.php?prod=rcmcdmm.

[PBO]

Happy Bday Jerry

Love this - "Not intended for inexperienced hobbyists"

[_paralyzed_]

Is that it? That's not what I was expecting, and I need the bottom plate for my flm chassis.

Are you sure that's what we were waiting for?

I need Mike's input...

[suicideneil]

For the FLM chassis you could mount it directly to the centre skid, using the supplied template to mark where to drill. For the Gmaxx chassis, you definately will need the bottom mounting plate to attach it to the chassis rails, otherwise it will have to go on the battery plate, making it sit really low- good for the CoG, bad as you'll need to notch the X-braces most likely, and probably mod the rear upper plate for the motor to fit, unless you use a rather short item.

Need Mike's input indeed....

[JERRY2KONE]

I am a little bit confused also Harold. I would have prefered that he just reproduced what he already had. That design was pretty simple and fit straight onto the Maxx chassis without a whole lot of bother. I am not sure what he was going for with this, but I will try anythying out at this point after waiting for over two years to get my hands on one. I knew you should have kept the one you had. I have an email into Mkie right now asking if this is what he had in mind for a replacement for the one you had.

[_paralyzed_]

The flm chassis doesn't come with a center skid. FRICK

[George16]

I'm glad I have some 3mm 7075 aircraft grade aluminum at my disposal. We'll see how this thing turns out.

[Arct1k]

I run it on my G3R - It requires from fine placement but a 44T spur is easy, a 46T is tight and 48T required a tickle to the braces...

[_paralyzed_]

I PM'd him. I can make it work. The price is nice. We'll see. Right now I'm practicing my deep breathing exercises and trying not to have a coronary embilism.

[JERRY2KONE]

Originally Posted by Arct1k

I run it on my G3R - It requires from fine placement but a 44T spur is easy, a 46T is tight and 48T required a tickle to the braces...

SO do you already this design setup in your trucks? So it is the answer to the original center diff mount that he made two years ago????

[JERRY2KONE]

Originally Posted by _paralyzed_

I PM'd him. I can make it work. The price is nice. We'll see. Right now I'm practicing my deep breathing exercises and trying not to have a coronary embilism.

Just wheel yourself over to James's house and chase him around with your chair while you hang on to a big 12 gage shotgun. That will relieve some stress for ya. As usual this is his fault anyway.

[George16]

Originally Posted by Arct1k

I run it on my G3R - It requires from fine placement but a 44T spur is easy, a 46T is tight and 48T required a tickle to the braces...

Pics?????????????????????????

[_paralyzed_]

nothing. luckily Linc quoted me, so my shame shall be immortalized

[lincpimp]

Originally Posted by JERRY2KONE

Just wheel yourself over to James's house and chase him around with your chair while you hang on to a big 12 gage shotgun. That will relieve some stress for ya. As usual this is his fault anyway.

Man, you old guys sure do get horny over nothing huh?

Originally Posted by Arct1k

I run it on my G3R - It requires from fine placement but a 44T spur is easy, a 46T is tight and 48T required a tickle to the braces...

Pics please Chris!

Originally Posted by George16

Pics?????????????????????????

+1

Originally Posted by _paralyzed_

I'm so pissed off over this outcome. Nothing I do with r/c seems to go in my favor. There is a 13 page thread with pictures showing specifically what customers wanted. I've been holding on to $$300 in my pay-pal account because I didn't know what 2 of these would cost. I feel like blowing the money on weed and relapsing, then throwing my stupid trucks through the wall. I'm literally hot over this, I feel like my blood is boiling. It doen't matter if anybody reponds to this post, I'm signing off for the night

Don't get those fat girl panties in a twist dude. I am sure that we can figure something out for you. Hissy fits will not get you anywhere...

[_paralyzed_]

thanks for quoting me Linc. Sorry for the threadjack Jerry. I went to my room and pouted, I feel much better now.