Can I change the stock Spur and Pinion?

[Hustler]

Is it possible to get higher top speed than stock if I change the stock spur and the stock pinion, leaving everything else (motor wise) the same?

Like if I go with the 54 tooth spur and a larger pinion? Whats the relative limit before things start heating up real bad?

Edit: I am talking about the emaxx btw. Forgot to mention b4.

[Monkey]

you can just watch the heat cant really say what pinion/spur when you havent told us the car

[coolhandcountry]

I tried going up on my emaxx. I got the motors hotter with really no speed increase. Try more cells unless you running 14 now.

[Hustler]

I am already runnin 14's. I just wanna take these motors to the max since I am pretty much ready for brushless. Just wwanna burn these before replacin em with a brushless one.

[coolhandcountry]

Well just do it and report back. :D
Then you can put a brushless on order while doing it.

[squeeforever]

Originally Posted by Hustler

I am already runnin 14's. I just wanna take these motors to the max since I am pretty much ready for brushless. Just wwanna burn these before replacin em with a brushless one.

To be honest, thats not really smart....That could also ruin the ESC. The motors have no value, but the ESC can sell on Ebay for $50+.

[Hustler]

Originally Posted by squeeforever

To be honest, thats not really smart....That could also ruin the ESC. The motors have no value, but the ESC can sell on Ebay for $50+.

:dft002:hmmmmm. So I take it, you are saying its not gonna improve anything if I change the spur and pinion only?

Thanx for the suggestion btw.

[crazyjr]

If you are talking about the titans and evx, i run a 64 tooth spur with stock pinions and got about 4mph out of it, running 12 cells

[Hustler]

Originally Posted by crazyjr

If you are talking about the titans and evx, i run a 64 tooth spur with stock pinions and got about 4mph out of it, running 12 cells

How are the temps?