Should I try this? HV setup Questions

[lincpimp]

I just received a kontronik Jazz 40-10-32

Wanted to try it out in my hyper7 on 7s lipo with an aveox 36/24/3 motor.

Motor is 1300 kv
Batteries are 4000mah maxamps, a 3s and a 4s pack
Controller is good to 10s lipo

Not sure if 40 amps will be enough on power handling by the esc. Motor is rated as 26/40amps on the box, and is similar in size to a feigao L can motor.

I am sure the batteries can keep up, they work fine in my 10th scale setups.

Any info or ideas a re welcome, i know some of you guys have run kontronic and aveox before so let me know what you think.

[lutach]

I ran 36V with my Kontronik 40A controller. It was geared to the moon and it ran good. I ran my BPP truck on grass and the old capacitor blew.

[lincpimp]

Good to know, I will give it a try. Do you have a link to the programming instructions for the jazz 40?

[sikeston34m]

Try gearing it low at first and monitor temps. If the esc is running fairly cool, then gear it up some.

Is that a Car esc with brakes and reverse?

They have a really good line of ESC's, expensive though.

[lutach]

Originally Posted by lincpimp

Good to know, I will give it a try. Do you have a link to the programming instructions for the jazz 40?

Here is the programming instructions for the Jazz:

http://www.kontronik.com/Downloadmess/JAZZ.pdf

English starts on page 25.

[marc993turbo]

Originally Posted by lutach

I ran 36V with my Kontronik 40A controller. It was geared to the moon and it ran good. I ran my BPP truck on grass and the old capacitor blew.

Good evening from Germany...

I think it´s offtopic in this thread - but please tell me: which conversion are you driving? Is this a savage?

I searched your posts but couldn´t find a description of your car...

Marc.

[lutach]

Originally Posted by marc993turbo

Good evening from Germany...

I think it´s offtopic in this thread - but please tell me: which conversion are you driving? Is this a savage?

I searched your posts but couldn´t find a description of your car...

Marc.

Hello Marc,

It is a bomb-Proof Products truggy.

Keep us posted. I plan to run 10S HV with a Kontronik Jazz too. I didn't know they made a 40-10-32. I'll be using the 55-10-32.

Do you know how many poles your motor is?

[lincpimp]

Not sure how many pole the aveox motors have. I think they are similar to the Neu motors, as Steve used to work for Aveox.

[lutach]

Originally Posted by lincpimp

Not sure how many pole the aveox motors have. I think they are similar to the Neu motors, as Steve used to work for Aveox.

The Aveox has 4 poles. Look at what Steve Neu said here:

http://www.rcgroups.com/forums/showt...20#post8434283