CC SC Motor

[Pdelcast]

Originally Posted by nitrostarter

Patrick, will these new motors be similar to the current motors in can design? Green and finned designs?

Similar -- for ROAR reasons we had to keep the diameter at 36mm, so the fins are not as deep as on the 1515 motor.

Thanx!

Sounds great Patrick

What about a 1409/1410 1.5D option (4500kv or so) for those of us who only want to swing between 2s/3s for bashing (most of us have these sort of packs for the stock Slash 4x4 system)

Or even a 1509/1.5D

Cheers

[nitrostarter]

Originally Posted by crusey_aus

Sounds great Patrick

What about a 1409/1410 1.5D option (4500kv or so) for those of us who only want to swing between 2s/3s for bashing (most of us have these sort of packs for the stock Slash 4x4 system)

Or even a 1509/1.5D

Cheers

I currently run the 1509/1Y in a Slash 4x4 as well as 2 of my racing buddies. This motor is great on 2s, and a beast on 3s. The 1Y is a better choice since it keeps the rpms lower at 3s while making great power.

[Pdelcast]

Originally Posted by crusey_aus

Sounds great Patrick

What about a 1409/1410 1.5D option (4500kv or so) for those of us who only want to swing between 2s/3s for bashing (most of us have these sort of packs for the stock Slash 4x4 system)

Or even a 1509/1.5D

Cheers

I'm not really a fan of Delta wound motors -- the same size motor in a Y wind will run cooler -- and you can just change the pinion to get the right speeds.

Just my humble opinion...

[plumslow]

Patrick are you going to have any of the 1410 series motors available with the 1/8 inch motor shaft? I would love to have a 4 pole for a 10th scale. I waited too long to get a Medusa motor like this. Thanks for your listening to the end users and the support after the sale.

[Pdelcast]

Originally Posted by plumslow

Patrick are you going to have any of the 1410 series motors available with the 1/8 inch motor shaft? I would love to have a 4 pole for a 10th scale. I waited too long to get a Medusa motor like this. Thanks for your listening to the end users and the support after the sale.

They have 1/8th shaft. ROAR rules you know. :)