CC SC Motor

[phatmonk]

So when is Castle gonna produce a Short Course brushless motor?That would be great!!!

[Pdelcast]

Originally Posted by phatmonk

So when is Castle gonna produce a Short Course brushless motor?That would be great!!!

Shipping in September/October -- two different versions.

One uses a 1410/1Y motor, an SCT specific version of the Sidewinder (beefed up for SCT), and is completely ROAR legal for 2S SCT racing.

The other version uses a 1415/1Y motor, and a Mamba Max Pro -- not ROAR legal, but setup for 3S-4S racing.

The motors will also be available separately.

Thanx!

Patrick

[nitrostarter]

Hmm, sounds like the 1509/1Y I already run in my SCT's!! Nice motor choice Patrick. This motor really rips in a SCT!

[BrianG]

Smaller motors with reasonable KVs! Thank you!

The 1410/1y sounds like a very good choice! Kv of around 3000-3300 and ~60mm long should fill in the gap left by Medusa. Nice for 3s and even 4s, 4 pole, slotted, etc.

The 1415/1y (2200kv) looks like it will be a good buggy motor for 4s use in places where the current 2650kv motor is a tad high on the kv. Lighter (10.5oz vs 12oz of the 1515) is nice too.

[nitrostarter]

Patrick, will these new motors be similar to the current motors in can design? Green and finned designs?

[phatmonk]

Yes Yes!!! thats awesome!BTW I am using 1512 in both my 10SC and Slash.Kinda heavy on 4S I want to eventualy go to 3s.

[Pdelcast]

Originally Posted by nitrostarter

Patrick, will these new motors be similar to the current motors in can design? Green and finned designs?

Similar -- for ROAR reasons we had to keep the diameter at 36mm, so the fins are not as deep as on the 1515 motor.

Thanx!

Sounds great Patrick

What about a 1409/1410 1.5D option (4500kv or so) for those of us who only want to swing between 2s/3s for bashing (most of us have these sort of packs for the stock Slash 4x4 system)

Or even a 1509/1.5D

Cheers

[nitrostarter]

Originally Posted by crusey_aus

Sounds great Patrick

What about a 1409/1410 1.5D option (4500kv or so) for those of us who only want to swing between 2s/3s for bashing (most of us have these sort of packs for the stock Slash 4x4 system)

Or even a 1509/1.5D

Cheers

I currently run the 1509/1Y in a Slash 4x4 as well as 2 of my racing buddies. This motor is great on 2s, and a beast on 3s. The 1Y is a better choice since it keeps the rpms lower at 3s while making great power.

[Pdelcast]

Originally Posted by crusey_aus

Sounds great Patrick

What about a 1409/1410 1.5D option (4500kv or so) for those of us who only want to swing between 2s/3s for bashing (most of us have these sort of packs for the stock Slash 4x4 system)

Or even a 1509/1.5D

Cheers

I'm not really a fan of Delta wound motors -- the same size motor in a Y wind will run cooler -- and you can just change the pinion to get the right speeds.

Just my humble opinion...

[plumslow]

Patrick are you going to have any of the 1410 series motors available with the 1/8 inch motor shaft? I would love to have a 4 pole for a 10th scale. I waited too long to get a Medusa motor like this. Thanks for your listening to the end users and the support after the sale.

[gixxer]

Will these be sensored or unsensored? thanks

[Pdelcast]

Originally Posted by plumslow

Patrick are you going to have any of the 1410 series motors available with the 1/8 inch motor shaft? I would love to have a 4 pole for a 10th scale. I waited too long to get a Medusa motor like this. Thanks for your listening to the end users and the support after the sale.

They have 1/8th shaft. ROAR rules you know. :)

[Pdelcast]

Originally Posted by gixxer

Will these be sensored or unsensored? thanks

We will offer the 1415 in both sensored and sensorless. The sensorless version will be available first.

[phatmonk]

Pics please.How many poles will the Sensor version be?
thanks