Quote:
Originally Posted by dezfan
5VDC
Dimensions: 1.60"W x 1.60"H x 0.80"D
8.6CFM
Ball bearing
Current: 700mA
Power: 2.0 watts
Noise: 36dBA
2.5" Lead wires with Bare ends
|
Takes quite a bit of BEC current IMO - that's 0.7A. And if you overvolt the fan to the typical 6v, it probably will pull more current. Kinda high on your typical 3A BEC (or even UBEC).
And yes, I am one of those who never use fans, but I won't get into that debate again!
Sometimes, just a little extra heatsinking is all that's needed.
Threaded Mode
