Problems with MRC 989 charger

[hootie7159]

MAKE THAT 4, MY MRC DIED AS WELL....THE POWER PLUGS MELTED AND IT SIMPLY JUST SHORTED OUT...I ALREADY HAD A HYPERION THAT WAS OLDER THAN THE MRC AND IS STILL WORKING....MRC=JUNK.......GET A HYPERION CHARGER

[TexasSP]

Correction, including mine that's 5.

Search the net, MRC's fail as much as I pass gas...............

[bl-is-future]

ok that is it. So before mine actually fails, what do recommend i get. I need 6s support and being i already have a FP V-Balancer and all my batts have TP taps i need either a conversion which i can get. Just mainly like the idea of the one Hyperion charger that can display each cell voltage using the LBA10. Let me know what you all think.
I created a new thread so i dont hijack this one. here is the link
http://www.rc-monster.com/forum/show...156#post194156

Originally Posted by bl-is-future

ok that is it. So before mine actually fails, what do recommend i get. I need 6s support and being i already have a FP V-Balancer and all my batts have TP taps i need either a conversion which i can get. Just mainly like the idea of the one Hyperion charger that can display each cell voltage using the LBA10. Let me know what you all think.
I created a new thread so i dont hijack this one. here is the link
http://www.rc-monster.com/forum/show...156#post194156

I have a 0610i that I charge my FP 6s 5000 packs with and I am only using half of its capability, you could use either the V balancer or the LB10 that is built in the 0610i and use an adapter...I have done both and now I just use the onboard balancer and the adapter