Enough said.

[lincpimp]

Originally Posted by tt-01 mamba

I've seen a couple of watercooling jackets and things for motors but nothing where the liquid is directly in contact with the motor.

Every boat cooling jacket I have ever seen allows the water to come in contact with the outside case of the motor. I have not seen one that will work with a finned neu, but they do make them for smooth can neu motors.

[brushlessboy16]

Originally Posted by lincpimp

Every boat cooling jacket I have ever seen allows the water to come in contact with the outside case of the motor. I have not seen one that will work with a finned neu, but they do make them for smooth can neu motors.

think he is talking about something like this

Originally Posted by brushlessboy16

think he is talking about something like this

I think he means actually having the fins of the motor machined out into a spiral to form water channels. Then having a cover to mate that and seal it all up with water in/out puts attached to it. That would probably take some $$$ in machining the inside of the outer cover to match up.

[lutach]

What he probably meant was a motor designed like the one in the attached picture.

[emaxxnitro]

Originally Posted by lutach

What he probably meant was a motor designed like the one in the attached picture.

is that a hacker c50 comp?

[lutach]

Originally Posted by emaxxnitro

is that a hacker c50 comp?

Yes.

[lincpimp]

Originally Posted by brushlessboy16

think he is talking about something like this

That is a cooling coil, not a cooling jacket. They work, but not as well as a jacket does.