Are Losi thread on pinions hardened?

[lincpimp]

Originally Posted by pb4ugo

Take a look at Savage and SavageX spurs. 49 is a common size and there are lots of steel ones available through the aftermarket.

Thanks for the info. I ended up just searching "49t" on tower hobbies and found that the Mgt 8.0 uses a nice looking flat 49t steel spur. So I had a look on ebay and found it for about 9 bucks shipped. I will have my machinist cut/bore it to the correct dimensions so that it will fit on the 2 speed hub.