Technical support for HOBBYWING products - RC-Monster Forums

superek4 · 05.11.2010, 07:54 AM

0 timing is not a good idea I suggest u gear down. Or change the motor. Kd motor is 2pole. 4pole is better.

Esc seldom overheats unless fan spoil.

Quote:

Originally Posted by Chadworkz

I am running a HobbyWing eZRun 80A ESC, KD36-74-1900kV Motor (with Turnigy Heatskin & Fan), and a pair of Zippy 30C 4S 2650mAh LiPo Batteries wired in parallel (4S-14.8V @ 5300mAh & 159A) in my Dad's E-Revo (stock except for Pro-Line Maxx Mulchers on Pro-Line Velocity 23mm ½" Off-Set Wheels with Dace Mfg. 23mm Hex-Adapters) geared for 38mph...

I have left most of the ESC settings on default, except setting the Timing to 0° and the Punch to 50%, but I have heard running 0° of timing is actually a bad thing...is this true? Default is 15°, but since the KD motors are known to run warm, I set the timing to 0° in order to keep it cool. I have never had any overheating issues, but would just like your input on the timing, and anything else you would like to add.

Thanks in advance...

bumsnogger · **esc unprogrammable -** 05.11.2010, 02:23 PM

Hi,I've emailed hobbywing several times,no reply

.A nd the eshop I got it from,same outcome. My esc is set on max everything,acceleration,brakes,etc.Its undrivable in my mlst2. I've seen you can programme it from your computer,but I've not got a usb lead. Any ideas? Any help is appreciated

superek4 · 05.11.2010, 05:33 PM

Quote:

Originally Posted by bumsnogger

Hi,I've emailed hobbywing several times,no reply

.A nd the eshop I got it from,same outcome. My esc is set on max everything,acceleration,brakes,etc.Its undrivable in my mlst2. I've seen you can programme it from your computer,but I've not got a usb lead. Any ideas? Any help is appreciated

Have u tried using the program card? It does not need a USB port

Chadworkz · 06:19 PM

Quote:

Originally Posted by bumsnogger

Hi,I've emailed hobbywing several times,no reply

.A nd the eshop I got it from,same outcome. My esc is set on max everything,acceleration,brakes,etc.Its undrivable in my mlst2. I've seen you can programme it from your computer,but I've not got a usb lead. Any ideas? Any help is appreciated

Definitely buy the program card, it makes programming super easy, easier than using your computer!

http://www.hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=8996

You can buy the cheaper programming card, but it just isn't very good, and the one above is awesome! I have both of them, so I can make the personal comparison.

superek4 · 05.11.2010, 06:47 PM

Quote:

Originally Posted by Chadworkz

Definitely buy the program card, it makes programming super easy, easier than using your computer!

http://www.hobbycity.com/hobbyking/store/uh_viewItem.asp?idProduct=8996

You can buy the cheaper programming card, but it just isn't very good, and the one above is awesome! I have both of them, so I can make the personal comparison.

yes I hv both of the programming card. The one above is better.

superek4 · 05.13.2010, 10:31 AM

Quote:

Originally Posted by bumsnogger

Hi,I've emailed hobbywing several times,no reply

.A nd the eshop I got it from,same outcome. My esc is set on max everything,acceleration,brakes,etc.Its undrivable in my mlst2. I've seen you can programme it from your computer,but I've not got a usb lead. Any ideas? Any help is appreciated

can u tell me more about your setting?

bumsnogger · **Thanks for the info! -** 05.14.2010, 08:41 AM

Hi, My esc's ste on max every thing,brakes,acceleration,everything! It's wrecked several diffs, and bodies. I need just to turn it down a bit(never thought I'd say that)

. As ever any info is appreciated

superek4 · 05.14.2010, 09:42 AM

Quote:

Originally Posted by bumsnogger

Hi, My esc's ste on max every thing,brakes,acceleration,everything! It's wrecked several diffs, and bodies. I need just to turn it down a bit(never thought I'd say that)

. As ever any info is appreciated

Did u reset the esc n try again? Did u manage to get another card to try?

**Hobbywing 150A esc and Neu-Castle 2200 motor. -** 05.20.2010, 05:56 PM

Hello.

I have this combo and woundering how to wire them together. On the Esc it says A,B and C and on the motor there is one red,black and White wire. Where do they go..

Dill

superek4 · 05.20.2010, 06:47 PM

Quote:

Originally Posted by dilldozer

Hello.

I have this combo and woundering how to wire them together. On the Esc it says A,B and C and on the motor there is one red,black and White wire. Where do they go..

Dill

It's a sensorless motor so any wire is fine, it won't burn up the motor. If it run reverse just swap 1 wire again.

The only time u need to follow ABC on esc n motor is on sensored motors.