Quote:
Originally Posted by SpEEdyBL
1.29 Feedback:
Firmware does not work with 6s and the Tekin 1400kv motor w/o the sensors. (haven't tried the sensors yet.) Even with torque control disabled, the motor will have no torque and spin at about one rotation per second, even at full throttle. Another person had the same problem with 4s using the Tekin 2050 also without the sensors. In my case I am able to run the 1400 with 4s with an occasional glitch (delay in throttle followed by a sudden burst of power). No issues running the 1400 on just 2s  .
I've installed and reinstalled V1.29 three times with the same result. Esc is the MMP. |
I had the same problem with my MMP/TEKIN 1700kv sensorless. Its smooth as silk running sensored now. On the other hand i have 2 MMM that i upgraded the firmware on have that problem also. I also have two other MMM that i didnt upgrade the firmware and they are fine.
Threaded Mode
