MMM v3?

[emaxxnitro]

Originally Posted by VintageMA

You may want to consider an order from MGM. The Euro conversion rate is much lower than it's been all year right now. 1.35$ = 1 Euro whereas it had been floating at 1.75-1.80$ = 1 Euro all year.

yeah mgm would be good its just im broke!

[hemiblas]

Originally Posted by emaxxnitro

this makes me mad!! i get to the track today the race is a rolling start i dont get even one lap in and the mamba max lays a turd. castle please hurry your loosing customers (fast)!

It looks like they are not losing customers. If you cant afford an MGM you will wait like the rest of us.

[e-mike]

Originally Posted by hemiblas

It looks like they are not losing customers.

right...!im confident that cc find the issue and begin the v3 production soon as possible....

[hemiblas]

Were all looking forward to running our MT's. I just hope you have an indoor track. Must get cold up there in Quebec during the winter.

[e-mike]

Originally Posted by hemiblas

hope you have an indoor track.

we dont have any indoor track here...but i will try to run in a school gym for testing my 5 v3 units!

Who,ll earase the mark leave by your tires Your wife no........

[e-mike]

ta yeule.... jva men occuper des mark.....

Originally Posted by e-mike

ta yeule.... jva men occuper des mark.....

[emaxxnitro]

man its a miracle to see snow around here much less be below 32* its always hot,dry,humid,dry,sunny,dry did i mention that its dry? it hasn't rained over 1/8" in a year! bring on the rain!

[DRIFT_BUGGY]

Hope the V3 comes out soon. Sick of taking the MMM case off to get grass/debris out

[emaxxnitro]

now that i said that... its raining today. sweet! i have to work

Originally Posted by emaxxnitro

now that i said that... its raining today. sweet! i have to work

...................sorry

[tuclai]

I am wondering if MGM ESC's would be more reliable than MMM. I have three MMM V2 sitting at Castle right now waiting for replacement after about 1 hour use on each unit and now Im wondering if I should try something else.

Money aside, with CC at least if my MMM goes out I may have to wait a month or two or more, but ultimately they replace. With MGM, I am hearing that it is not as easy since they are out of the country. I am very tempted to try MGM.

I will give my replacement MMM another shot when they arrive, if I have any more problems with them I think I will be giving up. I dont think its my setup because I am using NEU 1515 1.5d and NEU 1512 2.5d on my Losi 8ight Truggy and Buggy respectively. They are powered by NEU 4s 5000mah 25c Lipos. Temperatures for batteries are around 120's, motors are 140's, and ESC's are 130's. All 10 guage wiring througout.

Like I said if I still have problems with v3, I will be giving up on MMM. I may want to try out Losi's Xcelerion System, or maybe just try out the MGM ESC. Lets all keep our fingers cross.

http://good-times.webshots.com/album/562025697XGWJlX

[gramey]

Originally Posted by tuclai

I am wondering if MGM ESC's would be more reliable than MMM. I have three MMM V2 sitting at Castle right now waiting for replacement after about 1 hour use on each unit and now Im wondering if I should try something else.

Money aside, with CC at least if my MMM goes out I may have to wait a month or two or more, but ultimately they replace. With MGM, I am hearing that it is not as easy since they are out of the country. I am very tempted to try MGM.

I will give my replacement MMM another shot when they arrive, if I have any more problems with them I think I will be giving up. I dont think its my setup because I am using NEU 1515 1.5d and NEU 1512 2.5d on my Losi 8ight Truggy and Buggy respectively. They are powered by NEU 4s 5000mah 25c Lipos. Temperatures for batteries are around 120's, motors are 140's, and ESC's are 130's. All 10 guage wiring througout.

Like I said if I still have problems with v3, I will be giving up on MMM. I may want to try out Losi's Xcelerion System, or maybe just try out the MGM ESC. Lets all keep our fingers cross.

http://good-times.webshots.com/album/562025697XGWJlX

I'm running my 8 E-T with a Neu 1515-1Y and Thunder Power 4S 5000mah Extreme V.2 batteries via an MGM 16025-3 Z series esc and so it's been faultless other than a slight delay in initial throttle response. I'm running the Tekno set up and I shall try running without the clutch spring to see if the delay is mechanical, which I think it is, or if I need to adjust the esc settings.
The MGM is expensive compared to the MMM, and it's commendable that so many on here are so patriotic to an American company. I just decided it was worth the extra to have a truggy that was up and running reliably rather than sit and look at something waiting on the next promise on delivery and reliability.
I hope whatever you do you get sorted and are soon back out there having fun.

[tuclai]

I heard that the delay is due to the spring in the clutch. Tekno said you can run without spring for more punch. But, the delay to me seem neglegible since the spring on the shoes are suppose to lessen the load put on the motor, and I want the reliability. Like I said one more chance for MMM. I think I have been very patient!

http://good-times.webshots.com/album/562025697XGWJlX