hv is cutting out

little help,im running a X1CRT,novakHV,6.5,5000 35c 2sX2,11/62 gearing,spectrum pro rx,hs5955tg servo,novak glitch buster.My temps have been running ,motor156deg,ESC147deg,batteries97deg,deans ultras107deg. these are max temps after a full run of nine or ten minutes. My latest problem is the system has started to quit / glitch momentarily very early in the run ,hense the glitch buster.Its acting exactly like the lipo cutoff and it starts right back up,like the lipo cutoff. I pull it and recharge and the packs are only taking13 or1400ma. I cant find anything wrong mechanicaly or electricly accept my glitch buster was dented up so replaced it tonight and i do have two other dsm rx's so i might change that out but im running out of idea's , patients and money any thoughts out there